Samson 5824 Mounting And Operating Instructions page 50

Operation
Data logging
1. Plug the memory pen into the serial interface of the actuator (Fig. 8-4).
The yellow LED on the actuator indicates that the data logging is being prepared.
− Preparing data logging
A change in the blinking pattern of the yellow LED indicates that data are being saved to
the memory pen.
− Data logging in progress
2. Data logging is completed when you remove the memory pen from the serial interface of
the actuator.
Note
You can load a data logging file into the Trend-Viewer by selecting Load diagram ... from the
context-sensitive menu.
Transferring data onto a computer
1. Insert the memory pen together with modular adapter into the serial interface (COM
port) of the computer (see Annex for accessories).
2. Select 'Read Logged Data' from the 'Memory Pen' menu.
3. Select the desired target directory. If the target directory is not changed, data will be
saved in the SAMSON folder > Type 5824.
4. Enter the file name.
5. Click 'Save' to start data transmission.
8-8
On
Off
On
Off
Time in s
Time in s
EB 5824-2 EN