Samson 5824 Mounting And Operating Instructions page 21

Safety
Degree of protection
Class of protection
Device safety
Noise immunity
Noise emission
Vibration
Conformity
Testing according to DIN EN 14597
Additional electrical equipment (not suitable for retrofitting)
Two limit contacts , max. 230 V, 1 A
6)
Materials
Housing, housing cover
Coupling nut, M32x1.5
Weight
Actuators with 6 mm travel can also be used for valves with 7.5 mm travel.
1)
Adjustable (default settings in bold print)
2)
When a fast stroking speed and 24 V DC supply voltage are used, make sure the voltage does not fall below the
3)
specified value.
Safety spring pulls actuator stem to retracted end position; valve operated by valve spring.
4)
Manual override using 4 mm Allen key (after removing the cover); actuator always returns to fail-safe position after
5)
release.
Actuators for 85 to 264 V supply voltage cannot be fitted with limit contacts.
6)
The degree of protection IP 54 can only be achieved up to device index .03 when the actuator is installed in the
7)
upright position. See last two figures of the configuration ID written on the nameplate, e.g. Var.-ID xxxxxxx.xx, for
the device index.
With standard speed level
8)
The permissible medium temperature depends on the valve on which the electric actuator is mounted.
9)
The limits in the valve documentation apply.
EB 5824-2 EN
Type
-10
kg (approx.)
Design and principle of operation
5825
-20 -30
IP 54 according to EN 60529
II according to EN 61140
According to EN 61010-1
According to EN 61000-6-2 and EN 61326-1
According to EN 61000-6-3 and EN 61326-1
According to EN 60068-2-6 and EN 60068-2-27
–
•
Plastic (PPO with glass fiber reinforcement)
Brass
1.00
-15 -25 -35
7)
– – –
3-7