Alarms; Active Alarms; All Alarms - Trane Tracer TD7 Installation, Operation And Maintenance Manual

Alarms

Alarms appear on the Tracer TD7 display immediately upon detection. Touch the Alarms button in
the bottom display area to view the Alarms screen.

Active Alarms

Figure 6
required in order for points in alarm to appear in the Active Alarms screen. When the alarm clears
and the point returns to normal, the alarm will automatically be removed from the list.The number
of active alarms is displayed in the top right portion of the screen. When an active alarm is present,
the alarm button at the bottom of the screen will flash.
The Alarms screen defaults to Active Alarms. The Active Alarms button has a shaded appearance
which indicates that you are viewing active alarms.
Figure 6. Active Alarms screen
Sortable
Columns
Alarm Severity
Active Alarms
Button

All Alarms

On the Alarms screen, touch the All Alarms button to view all alarms, commonly referred to as the
event log (see
alarm notification class selected other than None when it was set up in Tracer TU. Additionally, the
point must have entered the appropriate notification (In Alarm, When Failed, Return to Normal, or
the notification class set to a value other than None). For more information, see
BAS-SVX50F-EN
shows the Active Alarms screen and commonly used functions. Configuration is not
Figure 7, p. 20). For the alarms to appear on the TD7 display, the point must have an
Number of Active Alarms
"Schedules," p. 69.
19