Setting Cpu Clock Frequency Through Jumper - MSI MS-6390 Manual

MS-6390 M-ATX Mainboard

Setting CPU Clock Frequency through Jumper

The hardware configuration for CPU clock frequency of the motherboard
is set to 133MHz by default. Therefore, to make a 100MHz CPU run at 100MHz
when it is installed on the board, you have to adjust the CPU clock frequency
through jumper.
To set the clock frequency of the installed CPU, refer to Jumpers/FSB
Clock Jumper: SW1 in later section of this chapter.
MSI Reminds You...
Overheating
Overheating will seriously damage the CPU and system, al-
ways make sure the cooling fan can work properly to protect
the CPU from overheating.
Replacing the CPU
While replacing the CPU, always turn off the ATX power sup-
ply or unplug the power supply's power cord from grounded
outlet first to ensure the safety of CPU.
Overclocking
This motherboard is designed to support overclocking.
However, please make sure your components are able to toler-
ate such abnormal setting, while doing overclocking. Any at-
tempt to operate beyond product specifications is not
recommended. We do not guarantee the damages or risks
caused by inadequate operation or beyond product
specifications.
2-6