Table of Contents
Advertisement
MS-6390 M-ATX Mainboard
dem is used, the onboard MC'97 (Modem Codec'97) controller will be
enabled; if not, it is disabled. Disable the controller if you want to use
other controller cards to connect to a modem. Setting options: Auto,
Disabled.
VIA-3043 OnChip LAN
The field determines whether the onchip LAN controller will be activated.
Setting options: Disabled, Enabled.
Onboard LAN Boot ROM
This setting enables/disables the initialization of the onboard LAN Boot
ROM during bootup. Selecting Disabled will speed up the boot process.
Super IO Device
Press <Enter> to enter the sub-menu and the following screen appears:
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDD) in-
stalled on the system board and you wish to use it. If you install add-on
FDC or the system has no floppy drive, select Disabled in this field. The
settings are: Enabled and Disabled.
Onboard Serial Port 1/Port 2
Select an address and corresponding interrupt for the first and second
serial ports. The settings are: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3,
Disabled, Auto.
3-18
Advertisement
Table of Contents
