Cpu Clock Frequency Selection Through Bios; Memory Speed/Cpu Fsb Support Matrix; Dimm Module Combination - MSI KT6-V User Manual

MS-7021 ATX Mainboard

CPU Clock Frequency Selection through BIOS

The hardware configuration for CPU clock frequency of the motherboard
is set to 100MHz by default. Therefore, to make a 133MHz CPU run at 133MHz
when it is installed on the board, you have to adjust the CPU clock frequency
in the BIOS setup utility.
To set the clock frequency for the installed CPU, refer to Frequency/
Voltage Control in Chapter 3. BIOS Setup.

Memory Speed/CPU FSB Support Matrix

Memory
CPU FSB
100MHz
133MHz
166MHz
200MHz

DIMM Module Combination

Install at least one DIMM module on the slots. Memory modules can be
installed on the slots in any order. You can install either single- or double-
sided modules to meet your own needs.
Memory modules can be installed in any combination as follows:
Slot
DIMM 1
(Bank 0 & 1)
DIMM 2
(Bank 2 & 3)
Maximum System Memory Supported
2-2
DDR 266
Yes
Yes
Yes
Yes
Memory Module
S/D
S/D
S: Single Side
DDR333 DDR400
No No
Yes Yes
Yes Yes
Yes Yes
Total Memory
64MB~1GB
64MB~1GB
64MB~2GB
D: Double Side