Registering New Users - Canon SCANFRONT 300 Instructions Manual

❏ Registering New Users
Click [New User] to register a new user.
IMPORTANT
• When using an authentication server
are logged in from an authentication server account are
registered automatically.
• If an e-mail address is registered for the authentication server
account, the e-mail address is also registered automatically.
• If an e-mail address is not registered for the authentication
server account, the e-mail address is not registered. Register
an e-mail address by editing the user settings
User Settings
• Authentication Server: Device
The authentication method for newly registered users is
Devic, and user authentication is performed on the
ScanFront (device).
Hint
For users logged in from an authentication server account and
automatically registered, the authentication method is the
domain name of the authentication server.
• User name/Password
Enter the user name and password to use for login.
• Password (confirmation)
Enter the same password again for confirmation.
• Mail Address
Enter the originating address for e-mail sent from the
scanner.
IMPORTANT
• Users are not permitted to register and change e-mail
addresses. Make sure e-mail addresses are registered and
changed by the administrator.
(see p. 6-35), users that
(see p. 6-11).
6-7
Chapter 6 Web Menu (Administrator Mode)
• If no e-mail address is registered, the administrator's e-mail
address is used as the originating e-mail address.
"Device Configuration" on p. 6-29.)
• SMTP/POP Before SMTP Authentication
Appears when [Auth Method] is configured to any
setting other than [SMTP] in the mail server settings
p. 6-34). Enter the [User name] and [Password] that will
be used for mail server authentication here.
IMPORTANT
Confirm the [User name] and [Password] with the user before
entering them. Otherwise, have the user enter them directly
under [User Settings] of the Web Menu (User Mode)
p. 8-5).
• Screen after Login
Select the Home screen or the Job Button screen as the
first screen to appear after the user logs in.
Home Screen
(See
(see
(see