Authentication Server - Canon SCANFRONT 300 Instructions Manual

If you enter the following substitution strings for these
settings, the strings will be replaced with the following
strings when the fax is sent.
Substitution String
Fax number that is registered in the
%n% address book and selected before
sending the image file.
%h% Provider name
%u% User name
%pw% Password
For example, the substitution strings that you enter will
be replaced as follows when the fax number is
"00111222", the provider name is "FaxService", and the
user name is "SFUser".
Entered String
%n%@%h% 0011112222@FaxService
Fax delivery
Fax delivery notification
notification
(from SFUser)
(from %u%)
❏ Authentication Server
When using a domain server compatible with Active
Directory or OpenLDAP, you can log in to the scanner
with a user account registered on the domain server.
In the authentication server settings, you can register the
domain server to use as the authentication server. If the
account information includes e-mail addresses, you can
configure settings for referring e-mail addresses.
You can register up to four authentication servers.
IMPORTANT
• After configuring an authentication server, restart the scanner
to update its display.
• When the authentication server and address book server
(LDAP server) are the same, enter values for all of the
settings.
Replacement String
Replacement String
6-35
Chapter 6 Web Menu (Administrator Mode)
• For details on the use and configuration of an authorization
server, consult your server administrator.
Enable Authentication Server
Select this check box to permit users registered on the
authentication server to log in.
Authentication Method
Select one of the following based on the directory service
used by the authentication server.
• Select [Simple] if the directory service used by the
authentication server is OpenLDAP.
• Select [Active Directory] if the directory service used by
the authentication server is Active Directory.
Search Base
Enter the search base for referring e-mail addresses
registered on the authentication server.
IMPORTANT
For information on the character strings to enter for the search
base, consult your system administrator.
Host Name (Address)
Enter the host name or address of the authentication server.
Domain
Enter a domain name supported by Active Directory.
Port number
Enter the port number used for the LDAP protocol. The
standard port number is 389.
User name
When using the authentication server as an address book
server, enter a user name for referring e-mail addresses.