Canon SCANFRONT 300 Instructions Manual page 50

4.
Read the license agreement, click [I Agree] if you
agree to it, and then click [Next].
A screen for selecting the installation folder appears.
5.
Click [Next].
A screen for entering account information appears.
6.
Enter the account information, and click [Next].
Use an administrator account on the computer on which
the service will be installed.
• When entering a local account on the computer, include
"./" at the beginning of the account name.
• If the computer is part of a domain and you are entering
the domain account here, enter the account in one of the
following formats.
Entry Format
<NetBIOS name>\<domain user
name>
<domain user name>@<FQDN
domain name>
• Confirm the password by entering it again in [Password
(Re-input)].
IMPORTANT
Make sure to specify an administrator account. In addition, be
aware that ScanFront Service will not function properly with
accounts for which a password is not configured.
A screen for specifying whether to start the service
immediately appears.
4-4
Chapter 4 ScanFront Service
Example
area1\SFUser
SFUser@area1.example.com