LCD Messages
See the table below when the LCD displays error messages.
Common
Message
CHANGE REG'D SIZE*
CHECK PRINTER
CLOSE COVER
FRONT COVER
11-7
Description
When the machine prints the
reports or lists, the paper
size is set to a size other
than <A4> or <LTR>.
A problem has occurred in
the printer.
The front cover is not closed
completely.
Action
Set the paper size to <A4>
or <LTR> and load paper of
the same size. For the TX
report or RX report, the
machine automatically prints
the report(s) which was
stored in memory.
Reset the machine by
opening the front cover and
then closing it. If the
message persists, unplug
the machine from the power
supply and contact your local
authorized Canon dealer or
the Canon help line.
Check the front cover, and
make sure that it is
completely closed.