Canon MF 3240 Series Basic Manual page 125

FAX SETTINGS (MF3240 Only)
RX TERMINAL ID
RX RESTRICTION
OFF
ON
REMOTE RX
CONT. PRINTING
4 COMMUNICATIONS
TEL LINE TYPE
TOUCH TONE
ROTARY PULSE
R-KEY SETTING
Sets whether to insert the machine's fax number and the
sender information on received faxes.
– OFF
– ON
Sets whether to receive a fax by detecting the TSI
(Transmitting Subscriber Identification) signal, used to
identify the sending fax machine. (See Chapter 1,
"Advanced Fax Features (MF3240 Only)," in the Advanced
Guide.)
All receptions are conducted.
Receives the fax only from the sending fax machine that
sends the TSI signal.
Sets whether to use remote receiving. (See Chapter 1,
"Advanced Fax Features (MF3240 Only)," in the Advanced
Guide.)
– ON
– OFF
Sets whether to stop printing when toner has run out. This
function is only for Fax printing and printing reports.
– OFF
– ON
Sets the communication setting.
Selects the telephone line type. (See "Set the Machine for
Sending Faxes (MF3240 Only)," in the Starter Guide.)
The telephone line is set for touch tone dialing.
The telephone line is set for rotary pulse dialing.
Registers the [R] key to access an outside line easily. (See
Chapter 1, "Advanced Fax Features (MF3240 Only)," in the
Advanced Guide.)
– PSTN
– PBX
12-10