Uniden UM725GBT Owner's Manual page 8

TO INSTALL THE FLUSH-MOUNT BRACKET (OPTIONAL FMB323 FLUSH MOUNT KIT
SOLD SEPARATELY)
You will need an opening for that radio that measures 5.5" by 2.85" to fit into (large
enough for the back of the radio to fit, but for the face of the radio to sit flush on the
surface. You will need clearance of at least 3.5" behind the radio to accommodate all the
necessary connections.
Tip: If you are cutting the opening in the surface, carefully examine the entire area before you
begin, including clearance behind the surface. Make sure all connections can reach the
radio. If you are uncertain of your placement, consult a professional.
1. Slide the radio into the surface opening.
2. Align the mounting brackets with the screw holes on the radio as indicated.
3. Insert and tighten the screws to secure the radio in place. The pads of the mounting
brackets should press firmly against the interior of the mounting surface.
E-4
Uniden UM725 Radio Owner's Manual