Accessing Navigation - Uniden UM725GBT Owner's Manual

ACCESSING NAVIGATION

When you press the NAVI soft key and the following two menus will appear.
x WAYPOINT DIRECTORY – Displays your waypoint directory for access or editing.
This list also includes information saved by MOB and MK POS keys (MOB appears as
MOB 001, 002... MK POS appears as MARK 001, 002... if they were saved without
being edited.)
x ROUTE DIRECTORY – Displays your route directory for access or editing.
TO START WAYPOINT NAVIGATION.
1. Select WAYPOINT. The WAYPOINT DIRECTORY
appears.
2. Select the desired waypoint and press the GOTO soft
key to start navigating to your destination.
Note: Navigation cannot be started without the location information from GPS. You can operate
radio during navigation, but you cannot edit or change location information (destination
or route) during navigation.
3. As you navigate, the screen displays your position
information.
4. When you arrive at destination, an arrival message will
be displayed and the arrival alert will sound. You can
select whether to continue or end navigation by pressing
the END or CLEAR soft keys.
If you press the CLEAR soft key, navigation will continue,
and once you go out of range and return to the range, the
arrival message will be displayed and arrival alert will sound
again.
Note: You can stop navigation anytime by pressing the CLEAR button.
E-40
Uniden UM725 Radio Owner's Manual
UM725GBT
UM725GBT
UM725GBT
UM725GBT
UM725GBT