Parameter Settings - Uniden UM725GBT Owner's Manual

TO START ROUTE NAVIGATION.
1. Select ROUTE. The ROUTE List appears.
2. Select the desired route and press the GOTO soft key to
start navigating to your first destination.
3. You can skip the destination by pressing the NEXT soft
key.
4. When you arrive at your first destination, the arrival alert
will sound.
x If the Routing Method is set to MANUAL, navigation to
the next destination will not start unless you press the
NEXT soft key each time you reach each destination.
x If the Routing Method is set to AUTO, navigation to the
next destination will automatically start after arriving at
your first destination. See "To Set Up a Route:" on page E-39.
5. When you arrive at destination, an arrival message will be displayed and the arrival
alert will sound. You can select whether to continue or end navigation by pressing the
END or CLEAR soft keys.
If you press the CLEAR soft key, navigation will continue, and once you go out of range and
return to the range, the arrival message will be displayed and arrival alert will sound again.

PARAMETER SETTINGS.

You can select the compass display range and whether the compass display is based
on the Cause or the North using the GPS settings. The distance at which the navigation
system determines that the ship has arrived at its destination can be customized in the
GPS settings. For more information see "To Configure Your GPS:" on page E-36.
A dot representing the destination appears on the screen. If the distance to the
destination exceeds the display range (indicated by the dot reaching the circle's edge)
you will need to adjust the display range manually or set the GPS to AUTO.
When set to AUTO, the range will change automatically adjust as needed to keep the
destination on screen.
When navigating, the screen displays the following information:
x COG – Cause over ground
x SOG – Speed over ground
x DST – Distance
x BRG – Bearing
x 01:29 PM – Current time
x Destination – Indcated by a dot in the compass
x C-UP – Cause UP (N-UP – North UP)
x Display Range (Distance from Center) – <1nm>
x Destination – "WAYPONT 1"
Uniden UM725 Radio Owner's Manual
UM725GBT
UM725GBT
UM725GBT
E-41