Uniden UM725GBT Owner's Manual page 43

TO SET UP A ROUTE:
1. Press the MENU button, and then use the PUSH/SEL knob to access the
WAYPOINT SETUP menu.
2. Use the PUSH/SEL knob to select ROUTING METHOD and
press SELECT. If set to AUTO, the screen automatically
changes to the next destination. If set to MANUAL,
navigation will not start until you press NEXT.
3. Select ROUTE DIRECTORY and press SELECT. The Route
Note: These settings cannot be set or changed during navigation. To make any changes, first exit
navigation mode.
Directory screen displays a list of available routes.
4. Use the PUSH/SEL knob to select a route and press EDIT.
NAME and LIST appear on the screen.
5. Use the PUSH/SEL knob to select NAME and press
SELECT. The pop-up keyboard appears.
6. Enter a name for the waypoint. When done, press FINISH.
NAME and LIST appear on the screen again.
7. Select LIST and press SELECT, The Rout List screen
appears.
8. Press the ADD soft key. The Point List screen appears with
a list of saved waypoints.
9. To add a waypoint, use the PUSH/SEL knob to select the
waypoint and press ADD.
10. Repeat step 8-9 for each waypoint you want to add to the
route.
Note: The Waypoint selected for the 01 position will be the first point to which your radio will
navigate. When you reach that waypoint, the radio will navigate to the next waypoint
(02), and continue through the list of waypoints.
11. Press BACK to exit.
Uniden UM725 Radio Owner's Manual
UM725GBT
UM725GBT
UM725GBT
UM725GBT
E-39