Table of Contents
Advertisement
Changes in Ver. 3.12
The changes in Platform Version Ver. 3.12 are listed below. The functions and settings listed here may not be available
on some models. For details, see the descriptions in the links in each change.
Changes to Functions(P. 40)
Changes to Settings/Registration(P. 40)
Changes to Functions
●
Support for changing the secondary transfer voltage (the voltage that transfers toner to the paper) for the
registered custom paper
Changes to the Secondary Transfer Voltage (Ver. 3.12-)(P. 7)
●
Change to the number of sheets in the Eco (Staple-Free) mode
Changes to the Eco (Staple-Free) mode (Ver. 3.12-)(P. 11)
●
Process for removing paper jam when the inner finisher is installed added
Changes Related to Clearing Paper Jams(P. 13)
●
Changes to specifications (Send functions/Printer functions)
Changes to System Specifications(P. 17)
Changes to Settings/Registration
●
<Adj. Lead Edge Sec. Transfer Volt.> and <Correct Tail End Toner Application> added
<Adj. Lead Edge Sec. Transfer Volt.>/< Correct Tail End Toner Application> (Ver. 3.12-)(P. 21)
●
<Allow Jobs to Be Performed from Mobile Device> added
<Allow Jobs to Be Performed from Mobile Device> (Ver. 3.12-)(P. 24)
Changes for Each Version
40
80L4-00C
Hide quick links:
Advertisement
Chapters
Table of Contents
