Canon imageRUNNER ADVANCE DX User Manual page 10

8
Specify the settings for the chart to be printed and press <Next>.
<Chart Print Type>
Select <For Fine Adjustment> to make fine adjustments or <For Coarse Adjustment> if major adjustment is
required.
● If you selected <For Fine Adjustment>, a chart is printed with adjustments in increments of ±1.
● If you selected <For Coarse Adjustment>, a chart is printed with adjustments in increments based on
the status of the machine.
<Print Side>
Select the side on which the secondary transfer voltage is to be adjusted.
● In any of the following situations, select <Front Side Only>.
- If <2nd Side of 2-Sided Page> is set to <On> for a custom paper.
- If you loaded paper in the multi-purpose tray and selected <2nd Side of 2-Sided Page> in <Paper
Type>.
● If you selected <2-Sided>, see "Introduction (About the Machine)"
Guide" for the papers that can be used for charts.
9
Select the paper source in which the custom paper is loaded
10
Press <Chart Print> or <Chart Print/Scan>.
● If you selected <Use Scanner> in step 2, press <Start Printing>.
➠
The chart is printed.
Adjusting the Secondary Transfer Voltage
Use the printed chart to adjust the secondary transfer voltage. The procedure differs depending on the secondary
transfer voltage adjustment method selected in step 2 of "
If you selected <Do Not Use Scanner>(P. 8)
If you selected <Use Scanner>(P. 10)
◼
If you selected <Do Not Use Scanner>
Visually identify the optimal patch in the chart and adjust the secondary transfer voltage.
Changes to Functions
Configuring/Printing the Chart(P. 7) ."
8
"Available Paper" in the "User's
press <OK>.