◼
If you selected <Use Scanner>
Scan the chart on the scanner to have the optimal patch identified automatically.
1
Place the chart on the platen glass.
●
Place the chart while following the on-screen instructions.
2
Close the feeder and press <Start Scanning>.
➠
The chart is scanned.
●
If the chart was printed on both sides of the paper, place the other side of the chart on the platen glass
and press <Start Scanning> again.
●
You may not be able to scan special paper such as colored paper, transparencies, pre-punched paper, or
labels. To scan special paper, select <Do Not Use Scanner> and make the adjustment manually.
3
Open the feeder and remove the chart.
4
Press <OK>.
Changes to Functions
10