Canon imageRUNNER ADVANCE DX User Manual page 33

<Monitor Volume>
Adjust the volume of the following tones. To mute the sound, press
the far left.
● The tone that sounds when sending faxes
● The tone that sounds when printing of a received fax is complete, and the tone that sounds when a fax
ends due to an error
Basic Operations Entering Sleep Mode
The description in "NOTE" of "Energy Consumption in Sleep Mode" has been changed.
When using a wireless LAN or Bluetooth also while in sleep mode
● Set <Sleep Mode Energy Use> to <High>.
Managing the Machine
Management Settings
The description of "NOTE" in "
changed (the fifth bullet point changed).
[Import Method:]
Select whether to import only updated or added user data, or all user data.
● If you select [Perform full import] and a user with the same user name is already registered, the user
information is overwritten.
● When importing information of a user who accesses the Advanced Box with SMB, specify the appropriate
value in the "password" column. If you export the data from the machine and import it to the other
machine without performing the above operation, authentication may fail. (The value is "********" when
exported.)
● When performing a complete import, any users not listed in the imported files are deleted from the
machine. However, "-----" and "Administrator", which are registered by default, will remain even if they are
not listed in the imported files.
● "User Authentication Format" is the only file format that is supported. Also, the "uid" column is required.
● Note that if you are using a server that does not support SMB v3.0 encrypted communication, user data
travels unencrypted across communication paths while it is being obtained.
Managing the Machine
Managing the Logs
The description of "NOTE" in step 5 of "Exporting Logs Automatically" has been changed (the eighth bullet point
changed).
● After automatic exporting of the audit logs has succeeded, the collected audit logs are automatically
deleted. Audit logs cannot be deleted manually.
Other Changes to the User's Guide
Managing Users
Importing/Exporting User Data
[Import Method:]" in step 5 of "Automatically Importing User Data" has been
Managing the Machine from a Computer (Remote UI)
31
several times to set the volume to
Configuring the Personal Authentication