Canon imageRUNNER ADVANCE DX User Manual page 32

Setting Up Setting up the Network Environment
Environment Making SMB Settings
The description of "
changed.
<Require Encryption for Connection>
To request a connection with SMB v3.0 encrypted communication when connecting to an SMB server,
press <On>.
Setting Up Setting up the Network Environment
Environment Making SMB Settings
The description of "IMPORTANT" in "Setting the SMB Client" has been changed (the first bullet point changed).
● When <Require Encryption for Connection> is set to <On>, the machine can only connect to SMB servers that
support SMB v3.0 encrypted communication. When <1.0> and <2.0> are set to <On> for <Specify SMB Client
Version> but <3.0> is not set to <On>, the machine cannot connect to SMB servers that do not support SMB
v3.0 encrypted communication.
● Use the same version of SMB with the SMB server and SMB client. SMB cannot be used if the versions differ.
Setting Up Setting the Advanced Space of the Machine
Public
The description of "
<Authentication Management> setting to <On>" in step 5 of "Advanced Space Batch Settings" has been
changed.
<Require Encryption for Connection>
To request a connection with SMB v3.0 encrypted communication when connecting to an SMB server,
press <On>.
Basic Operations
The description in "Adjusting the Volume for Sending/Receiving Faxes" has been changed.
You can adjust the volume of the communication sounds during fax transmission and the sound produced for
the fax sending/receiving result. You can also set whether to sound a tone indicating the result of Fax Memory
Lock sending/receiving.
Basic Operations
The description of
Sending/Receiving Faxes" has been changed.
<Alarm Volume>
Adjust the volume of the tone that sounds when the sending or receiving faxes is complete (except when
printing received faxes) and the volume of the tone that sounds when a fax is canceled or ends due to an
error. To mute the sound, press
Other Changes to the User's Guide
<Require Encryption for Connection>" in step 3 of "Setting the SMB Client" has been
<Require Encryption for Connection>" in step 1 of "If you set to <By SMB> and set the
Setting Sounds
Setting Sounds
<Alarm Volume> and
several times to set the volume to the far left.
Adapting to the Network
Adapting to the Network
<Monitor Volume> in Step 2 of "Adjusting the Volume for
30
Setting Advanced Space to