Canon imageRUNNER ADVANCE DX User Manual page 24

● Follow the guidelines below to perform adjustment.
- <Adjustment Level>: Increasing this in the positive direction increases the effect for tail end image
problems. Increasing the value too high may cause toner to be missing in high density areas.
- <Correction Amount>: Increasing this in the positive direction increases the distance where control is
performed from the tail end of the paper in the lead edge direction when seen from the tail end of the
paper. The distance increases in 1 mm increments.
● If performing adjustment does not improve the problem, adjust <Adjust Secondary Transfer Voltage> or
<Adj. Lead Edge Sec. Transfer Volt.>. In this case, decreasing the secondary transfer voltage from the current
value can have an effect, but adjustment should be performed gradually as it may affect the image.
◼
Settings/Registration Table
For details on how to view the Settings/Registration Table, see "Settings/Registration"
in the "User's Guide."
Item
<Paper Type Management
Settings>
Changes to Settings/Registration
Setting DeviceAdmin NetworkAdmin Can be
Description
<Details/Edit> Yes
● <Name>,
<Category>,
<Basis
Weight>,
<Finish>,
<Type>,
<Color>, <Use
as Template
Paper>, <2nd
Side of 2-
Sided Page>,
<Adjust
Image
Position>,
<Adjust Creep
Correction>,
<Adjust
Gloss>, <Adj.
Secondary
Transfer
Voltage>,
<Adj. Lead
Edge Sec.
Transfer
Volt.>,
<Correct Tail
End Toner
Application>,
<Toner
Amount
Reduction
Mode>
set in
Remote
UI
No Yes
22
"Settings/Registration Table"
Device Import Name of
Information All Item When
Delivery Function Exporting
Available with the
Remote UI
No * Paper Type
C
Management
Settings