Water Drainage; Drainage Into A Wash Basin; Drainage Into A Siphon; Drainage Into A Plastic Pipe With Rubber Sleeve Or Into A Gully - Bosch XQG80-WAP201601W Instruction Manual And Installation Instructions

Water drainage

Notes
Do not kink or protract the water
■
drainage hose.
Height difference between the
■
placement area and drainage point:
Minimum 0 cm – maximum 100 cm

Drainage into a wash basin

:
Warning
Risk of scalding!
When washing at high temperatures,
you may be scalded if you touch the hot
washing water (e.g. if draining hot
washing water into a washbasin).
Do not touch the hot washing water.
Caution!
Water damage
If the attached drainage hose slips out
of the washbasin due to high water
pressure when draining the appliance,
leaking water may cause damage.
Secure the drainage hose to prevent
it from slipping out of the washbasin.
Caution!
Damage to appliance/textiles
If the end of the drainage hose is
immersed in the drained water, water
may be drawn back into the appliance
and damage the washer dryer and/or
textiles.
Ensure that:
the sealing plug does not block the
■
outflow of the washbasin.
the water drains quickly enough.
■
the end of the drainage hose is not
■
immersed in the drained water.
Installation and connection
Installing the drainage hose:

Drainage into a siphon

The connection point must be secured
using a hose clamp with a diameter of
24–40 mm (available from specialist
dealers).
Connecting
Drainage into a plastic pipe
with rubber sleeve or into
a gully
Connecting
en
33