Table of Contents
Advertisement
Do not leave door open for
■
a prolonged period – water could
run out of the laundry.
Changing the programme
if you have mistakenly started a wrong
programme.
Select
1.
Select another programme.
2.
If required, adjust the presetting
and/or select other functions.
Select
3.
The new programme starts from
the beginning.
Interrupting or ending the
programme
For programmes at high temperature:
Select
1.
Cool down washing: select Single
2.
rinse
Select
3.
For programmes at low temperature:
Select
1.
Select Single spin.
2.
Select
3.
End of the programme
Start/Reload indicate light goes out and
End or - - - - (if - - - - was selected,
without drain) appears on the display
field, buzzer sounds. Set volume of
buzzer ~ Page 21
If - - - - was selected, - - - - is displayed
after the programme ends, touch
(Start/Pause) button.
Notes
The programme continues by
■
pumping out the water and spinning
the washing (the standard spin
speed can be changed beforehand).
(Start/Pause).
(Start/Pause).
(Start/Pause).
(Start/Pause).
(Start/Pause).
(Start/Pause).
Operating the appliance
If only the water is to be pumped out,
■
press the
button again before the spinning
starts. The programme is interrupted
and the door lock is released. The
washing can be removed.
After washing
Set programme selector to Off.
1.
Open appliance door and remove
2.
washing.
Notes
– Do not leave any items
of washing in the drum.
In the next wash they may shrink
or discolour something else.
– Remove any foreign objects from
the drum and the rubber seal.
Notes
– Leave detergent drawer and door
open so that residual water can
evaporate.
– Always remove the washing.
Turn off the tap.
3.
en
(Start/Pause)
17
Advertisement
Table of Contents
