Table of Contents
Advertisement
Insert the pump cover.
4th
Make sure that the components
-
of the pump cover are correctly
installed.
Insert the pump cover and close it
5.
as far as it will go.
90 °
The handle of the pump cover
must be vertical.
Insert the maintenance flap and click
6th
into place.
1
Close the maintenance hatch.
7th
2
Cleaning and care de
18.6 Clean the inlet opening in
the rubber sleeve.
gene
Regularly check the inlet opening in
the rubber sleeve for blockages and
clean the inlet opening.
Open door.
1.
Check the inlet opening for
2.
blockages and remove any
blockages.
Note: Do not use any pointed or
sharp objects.
18.7 Clean the water drainage
hose on the siphon
Switch off the device.
1.
Disconnect the device's power plug
2.
from the power supply.
57
Advertisement
Table of Contents
