Table of Contents
Advertisement
Driver Installation for Windows
VIA Chipset Drivers Installation:
Step 1: Insert the provided CD_ROM disk into the CD-ROM drive.
Step 2: Go to "My Computer", double click on the CD_ROM icon. The
setup screen will appear.
Step 3: Click on "Via Chipset Drivers" icon and the screen will show "VIA
Service Pack 4.XX".
Step 4: Click "Next" and the screen will show a "VIA Service Pack 1
README" dialog box.
Step 5: Click "Yes" and you can see "4in1 Setup Mode Option" with
"Normally Install" and "Quickly Install". If you choose "Quickly
Install", the drivers will be installed automatically. Then go to step
9. If you choose "Normally Install", go to step 6.
Step 6: Click "Yes" and the screen will show three drivers "VIA Driver
(Windows 2000)", "AGP VxD Driver" and "VIA INF Driver 1.XX."
Select all and click "Next" to proceed to next step.
Step 7: The screen will show a "VIA PCI IDE Bus Driver 1.XX" dialog box.
Select "Install VIA PCI IDE Bus Driver" and click "Next".
Step 8: The screen will show a "VIA_GART AGP Driver 4.XX" dialog box.
Select "Install AGP 4X/133 driver" and click "Next".
Step 9: Select "Yes" and then click "Finish" to restart the system.
2000
®
4-5
Installing Drivers
Advertisement
Table of Contents
