Table of Contents
Advertisement
Chapter 3
CPU Internal Cache
Enabled
Disabled
Note: The internal cache is built in the processor.
External Cache
Choose Enabled or Disabled. This option enables the level 2 cache memory.
CPU L2 Cache ECC Checking
Choose Enabled or Disabled. This option enables the level 2 cache memory
ECC (error check correction).
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power on the
computer. If this is set to Enabled, BIOS will shorten or skip some check
items during POST.
Enabled
Disabled
First/Second/Third/Other Boot Device
The BIOS attempts to load the operating system from the devices in the
sequence selected in these items. The settings are Floppy, LS/ZIP, HDD-0/
HDD-1/HDD-2/HDD-3, SCSI, CDROM, LAN, and Disabled.
Swap Floppy Drive
Switches the floppy disk drives between being designated as A and B.
Boot Up Floppy Seek
During POST, BIOS will determine if the floppy disk drive installed is 40 or 80
tracks. 360K type is 40 tracks while 760K, 1.2M and 1.44M are all 80 tracks.
Boot Up NumLock Status
On
Off
Enable cache
Disable cache
Enable quick POST
Normal POST
Keypad is numeric keys.
Keypad is arrow keys.
3-8
Advertisement
Table of Contents
