Table of Contents
Advertisement
Chapter 3
MPS Version Control For OS
This field allows you to select which MPS (Multi-Processor Specification)
version to be used for the operating system. You need to select the MPS
version supported by your operating system. To find out which version to
use, consult the vendor of your operating system. Settings: 1.4 and 1.1.
OS Selection for DRAM > 64MB
Allows OS2
to be used with > 64 MB of DRAM. Settings are Non-OS/2
®
and OS/2. Set to OS/2 if using more than 64MB DRAM and running OS/2
Video BIOS Shadow
This items sets if the Video BIOS will be copied to RAM and increase video
speed accordingly. Settings:Enabled/Disabled.
C8000-CBFFF/CC000-CFFFF/D0000-D3FFF/D4000-D7FFF/
D8000-DBFFF/DC000-DFFFF Shadow
These items specify whether the contents of the adapter ROM named in the
items will be copied into RAM to improve the performance of ROM firmware
for adapters. You need to know the address of each adapter ROM occupies
to shadow (copy) it into the correct area of RAM. Settings: Enabled/
Disabled.
Full Screen LOGO Show
This item enables you to show the company logo on the bootup screen.
Settings are:
Disabled
Enabled
Shows the POST messages at boot.
Shows a still image (logo) on the full screen at boot.
3-10
.
®
Advertisement
Table of Contents
