Table of Contents
Advertisement
Blinking
Single
Dual
Wake Up Events
VGA
LPT & COM I/O ACCESS
HDD & FDD I/O ACCESS
PCI Master
Power On by PCI Card
Wake Up On LAN/Ring
RTC Alarm Resume
x
Date (of Month)
x
Resume Time (hh:mm:ss)
IRQs Wake Up Event
8
IRQs Activity Monitoring
↑ ↓ → ← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-safe defaults F7:Optimized Defaults
VGA
When ON, you can set the VGA to awaken the system.
LPT & COM I/O Access
The settings are NONE, LPT, COM and COM/LPT. You can set which port
is used to wake up the system when there is any activity detected from one
of the listed ports.
HDD & FDD I/O Access
When HDD & FDD is On, any activity detected from one of the listed
system peripheral devices or IRQs wakes up the system
PCI Master
When PCI Master is On, any activity from the listed system peripheral
devices or IRQs wakes up the system.
The Power LED blinks to indicate the suspend state.
The Power LED remains the same color.
The Power LED changes its color to indicate the
suspend state.
Off
LPT/COM
On
Off
Disabled
Disabled
Disabled
0
0:0:0
ON
Press Enter
3-23
AWARD
BIOS Setup
®
Item Help
Menu Level
>
Advertisement
Table of Contents
