Running The Gth Ibert Demonstration - Xilinx Virtex-7 FPGA VC7222 Getting Started Manual

To copy the files from the SD memory card:
1. Connect the SD card to the host computer.
2. Locate the file rdf0297-vc7222-ibert-2015-1.zip on the SD memory card.
3. Unzip the files to a working directory on the host computer.

Running the GTH IBERT Demonstration

The GTH IBERT demonstration operates one GTH Quad at a time. This section describes how
to test GTH Quad 115, while the remaining GTH Quads are tested following similar steps.
Connecting the GTH Transceivers and Reference Clocks
Figure 1-1 shows the locations for all the GTH transceiver Quads on the Rev. 1 VC7222
board.
X-Ref Target - Figure 1-1
VC7222 IBERT Getting Started Guide
UG971 (Vivado Design Suite v2015.1) April 27, 2015
Chapter 1: VC7222 IBERT Getting Started Guide
Figure 1-1: GTH Quad Location
www.xilinx.com 9
Send Feedback