Inspecting And Changing Fuses - Honda CITY 2017 Owner's Manual

Inspecting and Changing Fuses

Blown Fuse
Fuse Puller
Blown Fuse
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an
ignition switch.
1. Turn the ignition switch to LOCK
headlights and all accessories off.
2. Remove the fuse box cover.
3. Check the large fuses in the engine
compartment.
u If the fuse is blown, have it replace by a
dealer.
4. Inspect the small fuses in the engine
compartment and the vehicle interior.
u If there is a burned out fuse, remove it
with the fuse puller and replace it with a
new one.
5. Check the large fuse in the vehicle interior.
u If the fuse is blown, use a phillips-head
screwdriver to remove the screw and
replace it with a new one.
6. Inspect the small fuses in the vehicle
interior.
u If there is a burned out fuse, remove it
with the fuse puller and replace it with a
new one.
uuFusesuInspecting and Changing Fuses
*1 . Turn
( 0 1Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Replace fuse with a spare fuse of the same specified
amperage.
Use the charts to locate the fuse in question and
confirm the specified amperage.
2 Fuse Locations P. 440, 442, 443
There is a fuse puller on the type B engine
compartment fuse box cover.
447