Honda CITY 2017 Owner's Manual page 109

uuGauges and DisplaysuInformation Display
■
Outside Temperature
Shows the outside temperature in Celsius.
If the outside temperature has been below 3°C at the time you turn the ignition
switch to ON *1 , the outside temperature indicator blinks for 10 seconds.
( w
■
Adjusting the outside temperature display
Adjust the temperature reading up to ±3ºC if the temperature reading seems
incorrect.
1. Turn the ignition switch to ON
2. Press and hold the
u The following sequence appears for one second each: 0, 1, 2, 3, -3, -2, -1, 0
3. When it reaches the desired value, release the
u The new outside temperature is now entered.
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an
ignition switch.
* Not available on all models
108
*
( w *1 .
knob for 10 seconds or more.
knob.
*
1Outside Temperature
The temperature sensor is in the front bumper. Road
heat and exhaust from another vehicle can affect the
temperature reading when your vehicle speed is less
than 30 km/h.
It may take several minutes for the display to be
updated after the temperature reading has stabilised.