uuEngine Does Not StartuIf the Keyless Remote Battery is Weak
Models with keyless access system
If the Keyless Remote Battery is Weak
If the beeper sounds, the KEY BATT message appears on the information display,
the ENGINE START/STOP button flashes, and the engine won't start, start the
engine as follows.
428
1. Touch the centre of the ENGINE START/
STOP button with the H logo on the keyless
remote while the ENGINE START/STOP
button is flashing. The buttons on the
keyless remote should be facing you.
u
The ENGINE START/STOP button
flashes for about 30 seconds.
2. Depress the brake pedal (continuously
variable transmission) or clutch pedal
(manual transmission) and press the
ENGINE START/STOP button within 10
seconds after the beeper sounds and the
ENGINE START/STOP button changes
from flashing to on.
If you don't depress the pedal, the mode
u
will change to ACCESSORY.