Honda CITY 2017 Owner's Manual page 169

uuAdjusting the SeatsuHead Restraints
■
Changing the Rear Seat Head Restraint Position
■
Removing and Reinstalling the Head Restraints
Head restraints can be removed for cleaning or repair.
To remove the head restraint:
Pull the restraint up as far as it will go. Then push the release button, and pull the
restraint up and out.
To reinstall the head restraint:
Insert the legs back in place, then adjust the head restraint to an appropriate height
while pressing the release button. Pull up on the restraint to make sure it is locked
in position.
* Not available on all models
168
A passenger sitting in the outer or centre
back seating position should adjust the height
of their head restraint to an appropriate
position before the vehicle begins moving.
To raise the head restraint:
Release Pull it upward.
Button
To lower the head restraint:
Push it down while pressing the release
button.
*
1Removing and Reinstalling the Head Restraints
*
Failure to reinstall, or correctly reinstall, the
head restraints can result in severe injury
during a crash.
Always replace the head restraints before
driving.
*
WARNING
3