Replacing Light Bulbs - Honda CITY 2017 Owner's Manual

Replacing Light Bulbs

Headlight Bulbs
When replacing, use the following bulbs.
High beam headlight: 60 W (HB3 for halogen bulb type)
Low beam headlight:
■
High Beam Headlight
Models with halogen headlights
Holding Clip
Tab
* Not available on all models
382
LED type *
55 W (H11 for halogen bulb type)
LED type *
Right side
1. Remove the holding clip using a flat-tip
screwdriver, then remove the upper part of
the window washer reserve tank.
Both sides
2. Push the tab to remove the coupler.
3. Rotate the old bulb to the left to remove.
4. Insert a new bulb into the headlight
Bulb
assembly and turn it to the right.
5. Insert the coupler into the connector of the
bulb.
Coupler
1Headlight Bulbs
*
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
*
the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not
need to be adjusted. However, if you regularly carry
heavy items in the boot or tow
aiming readjusted at a dealer or by a qualified
technician.
When replacing a halogen bulb, handle it by its base,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
Models with LED headlights
High beam and low beam headlights are LED type.
Have an authorised Honda dealer inspect and replace
the light assembly.
* a trailer, have the