Honda CITY 2017 Owner's Manual page 426

5. Lower the vehicle and remove the jack.
Tighten the wheel nuts in the order
indicated in the image. Go around,
tightening the nuts, two to three times in
this order.
Wheel nut torque:
108 N∙m (11 kgf∙m, 80 lbf∙ft)
uuIf a Tyre Goes FlatuChanging a Flat Tyre
1Replacing the Flat Tyre
Models with wheel cover and full-size spare tyre
Align the valve mark on the wheel cover to the tyre
valve on the wheel, then install the wheel cover.
Wheel
Cover
Valve Mark
Make sure the wire support ring is on the outer side
of the tyre valve as shown.
Tyre Valve
Wire Support Ring
Continued 425