Chapter 3 Setting
3.3
RAS data variables Registration
The IS911 module can monitor transmission status information. To do so, it is
necessary to register RAS data variables in advance. The following explains
how to register RAS data variables.
(1) Right-click [00 (IS911)] in the product tree and select <I/O Variables...> to
(2) Click <Lock up> to release the edit lock.
(3) Click <Default Variable> to register the RAS data variable.
Once the RAS data variable is registered, the controller RAS data can be
monitored on the I/O Variables screen. For the contents of RAS data, refer to
"Chapter 5 Troubleshooting".
44
6F8C1509
display the I/O Variables screen.
(1)
Figure 3-15 RAS data variables Registration
(3)
(2)