Toshiba nv Series Instruction Manual page 53

Tc-net i/o serial communication module is911

Hide thumbs Also See for nv Series:

Table of Contents

Next, set and register the network variable name and other information on

the Network Variables screen.

The following explains how to assign input variables.

(1) Click <Lock up> on the Network Variables screen to unlock the edit lock.

(2) Enter "PLC1_RI" in <Variable>. (3) Enter "ARRAY[0..9] OF WORD" in

<Data type>. (4) Enter "PLC1_input relay" in <Comment>. (5) Select "1:

IS911" in <In Node>. (6) Click <Assign to Inputs> to display PLC1_RI in (7)

<Variable> <Data type>. (8) Select "MS" for <I/O Speed>.

This completes the assignment of the station variable (PLC1_RI).

(2)

(3)

(5)

(7)

Figure 3-12 Network Variables(Input) Registration

Remark

 For input variables, first assign the variable name, type, and comment to the

corresponding Talker Block. Next, assign a variable to the In Node and set the I/O

Speed.

Unified Controller nv series TC-net I/O Serial Communication Module IS911 Instruction Manual

3.2 IS911 module registration and Parameter setting

(4)

(6)

(8)

(1)

Table of Contents