Table of Contents
Advertisement
INSTALLATION
FLAMMABLE MATERIAL WARNING!
Keep drive a minimum of 5.0 feet (1.5m) away from flammable material and/or pyrotechnics.
DO NOT INSTALL THE DEVICE IF YOU ARE NOT QUALIFIED TO DO SO!
The driver MUST be installed following all local, national, and country commercial electrical and
•
construction codes and regulations.
Before installing or mounting any device, a professional equipment installer MUST be consulted
•
to determine whether the mounting structure or surface is properly certified to safely support the
combined weight of the device and any relevant accessories.
•
The device should be installed in areas outside walking paths, seating areas, or away from areas
where unauthorized personnel might be able to reach the device by hand.
MOUNTING
This device can be mounted using M4x25 self-tapping screws and the mounting brackets located
on each side of the device. Use all four (4) points on the mounting brackets to ensure that the device
is mounted securely. Please see the illustration below for reference.
9
Advertisement
Table of Contents
