Transmission (Gear Position) Switch - Polaris RZR XP 1000 2014 Service Manual

ELECTRICAL

TRANSMISSION (GEAR POSITION) SWITCH

1. The transmission (gear position) switch
on the RH side of the transmission and can be
accessed through the RH wheel well area.
2. Disconnect the transmission switch harness by lifting
the connector lock and pulling on the connector. Do
not pull on the wiring.
11.14
3. Test the transmission switch continuity readings for
each gear position and compare to the specification
q
is located
table below.
POSITION
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
RESISTANCE VALUE
GEAR
WHEN MEASURED AT
SWITCH TERMINALS A AND B
HIGH
LOW
NEU
REV
PARK
© Copyright Polaris Industries Inc.
24 Ω
75 Ω
160 Ω
300 Ω
620 Ω