Polaris RZR XP 1000 2014 Service Manual page 184

FUEL SYSTEM
6. Disconnect the fuel injector harness leads
7. Hold a shop towel over the fuel line fitting and
remove the fuel supply line
8. Remove tie strap retaining the injector harness leads
to the fuel rail. Remove the two screws
the fuel rail to the throttle body using a 5 mm Allen
wrench.
4.14
r
.
t
from the fuel rail.
y
that mount
9. Carefully pull up on the fuel rail
remove them from the throttle body as an assembly.
Take care not to damage the fuel injector ends during
removal.
10. Pull out on the fuel injector retaining clip and pull the
injector out of the fuel rail. Repeat on the other
injector if removal is necessary.
11. Upon installation of the new fuel injectors, lightly
lubricate the injector O-rings to aid installation.
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
u
and injectors and
© Copyright Polaris Industries Inc.