Polaris RZR XP 1000 2014 Service Manual page 96

Table of Contents

ENGINE / COOLING SYSTEM

8. Lift the cover from the housing and remove the

Thermostat has a pop-off relief to allow the bypass

system to operate until thermostat opens.

9. Install a new thermostat with the bleed hole

positioned closest to the engine.

Image shown above is with engine removed for clarity.

10. Reverse this procedure for installation. Torque

thermostat cover bolts to specification.

Thermostat Cover Bolts:

7 ft-lb (10 Nm)

11. Be sure to properly fill and bleed cooling system as

outlined in this chapter.

9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual

Chapters

Table of Contents