Polaris RANGER 500 2017 Service Manual page 274

ENGINE / COOLING SYSTEM
14. Torque the camshaft carrier bolts in sequence to
specification.
TORQUE
Camshaft Carrier Bolts:
7 ft-lbs (10 N·m)
15. Insure the new sealing washer
3.118
u
is in place.
16. Install the hydraulic cam chain tensioner
cylinder and torque to specification.
TORQUE
Cam Chain Tensioner:
30 ft-lb (40 Nm)
17. Rotate crankshaft through two revolutions and verify
camshaft timing is correct.
18. Check the valve lash after tensioner installation and
two engine revolutions.
NOTICE
Verify the valve lash after rotating the engine.
9850043 R01 - 2017-2021 RANGER 500 / 570 Service Manual
i
into the
© Copyright Polaris Inc.