Table of Contents
Advertisement
100 Light and sight
High beam
To switch on: turn the light switch to the
#
L or à position.
Press the combination switch beyond the
#
point of resistance in the direction of arrow
1.
When the high beam is activated, the indica‐
tor lamp for low beam L will be deactiva‐
ted and replaced by the indicator lamp for
high beam K.
To switch off: move the combination switch
#
back to its starting position.
Headlamp flasher
Pull the combination switch in the direction
#
of arrow 3.
Turn signal indicators
To indicate briefly: press the combination
#
switch briefly to the point of resistance in the
direction of arrow
2
or 4.
The corresponding turn signal indicator will
flash three times.
To indicate permanently: press the combi‐
#
nation switch beyond the point of resistance
in the direction of arrow
2
Activating/deactivating the hazard warning
lights
Press button
1
.
#
The hazard warning lights will switch on auto‐
matically if:
or 4.
the airbag has been deployed.
R
the vehicle is heavily braked from a speed of
R
more than 70 km/h to a standstill.
When you pull away again, the hazard warning
lights will switch off automatically at approx‐
imately 10 km/h. You can also switch off the
hazard warning lights using button 1.
Adaptive Highbeam Assist
Adaptive Highbeam Assist function
& WARNING Risk of accident despite
Adaptive Highbeam Assist
Adaptive Highbeam Assist does not recog‐
nise the following road users:
Road users without lights, e.g. pedes‐
R
trians
Road users with poor lighting, e.g.
R
cyclists
Advertisement
Table of Contents
