Steering Shaft Bushing Replacement - Polaris RZR PRO XP 2020 Service Manual

STEERING / SUSPENSION
4. Install the steering wheel hub and retaining nut.
Torque the nut to specification.
TORQUE
Steering Wheel Nut:
65 ft-lbs (88 Nm)
5. Be sure the front wheels are pointing straight ahead
and install the steering wheel and six fasteners.
Torque fasteners to specification.
TORQUE
Steering Wheel Fasteners:
72 in-lbs (9 Nm)
6. Install a new upper steering shaft pinch bolt and nut.
Torque pinch bolt to specification.
TORQUE
Steering Shaft Pinch Bolt:
25 ft-lb (34 Nm)
7. Reconnect both electrical harnesses onto the power
steering unit. Be sure the connectors snap into place.
8. Reinstall the black plastic cover over the power
steering unit and install the two Torx fasteners.
9. Vehicles equipped with Dynamix suspension having a
steering shaft, EPS unit, steering rack, or tie rod
removed/adjusted/disconnected MUST have Steering
Angle Sensor Centering procedure performed once
everything is reinstalled. Refer to Steering Angle
Sensor Centering (Dynamix) page 12.18.
10. Turn the key switch on and test EPS operation.
9.14
STEERING SHAFT BUSHING
REPLACEMENT
NOTICE
Replacement steering column assembly comes with
new upper and lower bearings installed. Use this
procedure if replacing only the bushing.
1. Perform the "Steering Shaft Removal" procedure.
2. Remove the steering wheel cover.
3. Remove steering shaft retaining nut.
4. Press steering shaft out of the steering column.
q
Steering Wheel
Cover
w
Nut
e
Steering Wheel
NOTICE
Observe the order and location of the washers and
spacers between the steering wheel and steering
column.
5. Reinstall the upper washers and spacers in the order
in which they were removed.
6. Install the hub adapter and hand tighten the nut.
7. Reinstall the steering shaft assembly in the vehicle.
Install the lower portion of the steering shaft onto the
power steering unit. Torque the lower pinch bolt to
specification.
TORQUE
Steering Shaft Pinch Bolt:
25 ft-lb (34 Nm)
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
r
Bushing
t
Steering Column
y
Steering Shaft
© Copyright Polaris Industries Inc.