Wolf E Series General Information Manual page 55

Rear Component Removal and Installation
REAR COMPONENT REMOVAL AND INSTALLATION
UPPER BACK COVER REMOVAL
WARNING
Disconnect the product from the power source
before starting this procedure.
To remove the upper back cover, first
Remove the Upper Back Cover
1 Use a T-20 Torx bit to remove the screws from the upper
back cover.
2 Remove the upper back cover from the unit.
UPPER BACK COVER INSTALLATION
After installing the upper back cover,
Install the Upper Back Cover
1 Place the upper back cover onto the unit.
2 Use a T-20 Torx bit to install the screws into the upper back
cover.
829345 REVA
uninstall the unit
.
install the unit .
COOLING FAN REMOVAL
WARNING
Disconnect the product from the power source
before starting this procedure.
To remove the cooling fan, first
1 Upper back cover
Remove the Cooling Fan
1
1 Use a / " socket to remove the cooling fan mounting
4
screws.
2 Disconnect the wire harnesses from the cooling fan.
3 Remove the cooling fan from the unit.
COOLING FAN INSTALLATION
After installing the cooling fan, install:
1 Upper back cover
install the unit
Then .
55
E Series Oven
service.subzero.com
uninstall the unit . Then remove: