Advertisement
Available languages
Available languages
ENGLISH
– Make sure that operating voltage of the unit corre-
sponds to voltage of your mains.
– Before using the coffee maker for the first time wash
all the removable parts, namely the lid (9), the water
tank (10), the filter holder (15), the coffee filter (16)
and the measuring spoon (17) with warm water and
a neutral detergent.
Washing the boiler
– Make sure that the power plug is not inserted into
the mains socket, and the steam supply knob (11) is
in the position «OFF».
– Remove the water tank (10) and fill it with cold water
till the «MAX» mark.
– Cover the tank (10) with the lid (9) and place it on the
coffee maker body (3).
– Insert the coffee filter (16) into the holder (15) (pic.
1).
– Without adding coffee into the filter (16) attach the
filter holder (15) to the boiler; to do this, place the
filter holder handle (13) as shown on the picture 2,
then turn it to the right till bumping (pic. 3).
– Place a suitable cup on the grid (2).
– Insert the power plug into the mains socket.
– Switch the coffee maker on pressing the button (6)
, the button (6)
ing indicating that the boiler heating is on.
– Wait till the boiler heats up (the button (6)
indicator stops flashing), then press the button (5)
. Wait till the cup is full, then pour out the wa-
ter.
Note: If the cup capacity is not enough, stop the water
supply by pressing the button (5)
– Repeat this procedure several times, the boiler will
be clean after that.
Attention!
Do not remove the filter holder (15) during the cof-
fee maker operation.
– Before washing the cappuccinator pipe (12) place a
suitable cup under it.
– Press the button (7)
will be flashing, wait till the button (7)
tor will stop flashing.
– For steam supply slightly turn the steam supply
knob (11) counterclockwise.
– Wait till some water pours from the cappuccina-
tor pipe (12), steam will go out more intensively af-
ter that; switch the steam supply off after a while
by setting the steam supply knob (11) to the posi-
tion «OFF».
– To switch to coffee making mode press the button
(6)
.
– To switch the coffee maker in the coffee making
mode off press the button (6)
– To switch the coffee maker in the steam supply
mode off press the button (7)
Note: When the electric pump is switched on for the first
time for water supply, a foreign sound and noticeable
vibration of the unit body is possible; when the pump
indicator will be flash-
again.
, the button (7) indicator
indica-
.
.
is filled with water, the sound and vibration level will
decrease significantly.
Setting of coffee making duration
By default coffee maker operation time is 20 seconds
when pressing the button (4)
cluding the time necessary for preliminary soaking of
coffee in the filter (16)) when pressing the button (5)
.
You can change the amount of ready drink by changing
the coffee making duration. Preset coffee making time is
saved in the coffee maker. Preset time remains the same
when you switch the unit afterwards.
– Press and hold the button (4)
and the button (5)
– Coffee making duration will correspond the time you
hold the corresponding button.
– To switch the unit back to default settings press
and hold the buttons (4)
eral seconds.
Example:
Press and hold the button (4)
the button(4)
again, the coffee maker will operate in
the coffee making mode for 30 seconds.
If you hold the button (4)
maker will operate for maximal possible time that is 60
seconds.
To set longer coffee making duration (35-100 seconds)
use the button (5)
Note: Amount of ready drink depends on sort of cof-
fee, degree of its fineness and on the effort you made
tampering it in the filter (16).
Making espresso
Note: Repeated making of coffee should be performed
after at least 5 min interval.
– Use only clear water for making coffee and keep the
water tank (10) clean.
– Before making coffee wait till the boiler heats up
(the button (6)
– Before making coffee warm up the filter holder (15),
the filter (16) and the cups by placing them on the
tray (8).
– You can warm the filter holder (15) and the filter (16)
with hot water from the boiler without adding cof-
fee to the filter:
– attach the holder (15) to the coffee maker boiler
(pic. 2, 3).
– place a suitable cup on the grid (2).
– switch the water supply on by pressing the but-
ton (4)
or (5)
Note: If you want to stop the water supply, press the
button (4)
or the button (5)
– Remove the cup, remove the holder (15). If there is
water in the filter (16), lift the filter clamp (14) and,
holding the filter (16) with this clamp, pour out the
water.
4
and 35 seconds (ex-
for 20-60 seconds,
- for 35-100 seconds.
and (5)
for 30 seconds. Press
for 70 seconds, the coffee
.
indicator will stop flashing).
.
again.
for sev-
Advertisement
