Selecting The Sound Quality; Adjusting The Sound Quality - Sony MZ-N1 Operating Instructions Manual

Selecting the sound quality

Factory settings of the Digital Sound Preset
are as follows:
• "SOUND1" (on the recorder)/"S 1" (on
the remote control) : bass +1, treble ±0
• "SOUND2" (on the recorder)/"S 2" (on
the remote control): bass +3, treble ±0
On the recorder
1 Press the jog dial.
2 Turn the jog dial until "SOUND" flashes
in the display, and then press to enter.
3 Turn the jog dial until "SOUND 1" or
"SOUND 2" flashes in the display, and
then press to enter.
On the remote control
1 Press SOUND on the remote control
repeatedly to select "S 1" or "S 2".

Adjusting the sound quality

On the recorder
1 Press the jog dial.
2 Turn the jog dial until "SOUND" flashes
in the display, and then press to enter.
3 Turn the jog dial until "SOUND 1" or
"SOUND 2" flashes in the display.
The display shows the currently selected
T (treble) and B (bass) settings.
4 Select "T" or "B" flipping the bar
towards x or X.
You can change the adjust of the item in
which the cursor is flashing.
5 Turn the jog dial to adjust the sound level.
To move the cursor between "T" to "B":
flip the bar towards x or X.
To switch between "SOUND 1" to
"SOUND 2": move the cursor to the top
row, and then turn the jog dial.
6 Press the jog dial to enter.
The sound settings are saved and the
playback display appears again.
On the remote control
1 Press SOUND on the remote control
repeatedly to select "S 1" or "S 2".
2 During playback, press SOUND for 2
seconds or more.
The recorder changes to B-setting mode.
Pressing the SOUND button for 2
seconds again changes the recorder back
to T-setting mode.
108
3 Turn the control repeatedly to adjust the
bass or treble.
To switch "B" and "T":
Press SOUND for 2 seconds or more.
To switch "S 1" and "S 2":
Press SOUND for a short time.
4 Press x to enter .
To cancel the Digital Sound Preset
• On the recorder
Select "SOUND OFF" in step 3.
• On the remote control
Press SOUND repeatedly until nothing
appears in the display.
Notes
• Digital Sound Preset becomes inoperative
when the "AUDIO OUT" parameter for the
i/LINE OUT jack is set to "LINE OUT". In
this case, set the "AUDIO OUT" to
"HeadPhone" (page 100).
• When you use the Digital Sound Preset, the
sound may break or become distorted
depending on the settings or the track. In
this case, change the settings of the sound
quality.
• Changing to another Digital Sound Preset
during a recording operation will not affect
the quality of recorded sound.
To change playback speed
(Speed Control)
See the illustrations in Japanese text (pages 44
and 45).
The playback speed can be adjusted in 7
steps (80%, 85%, ...100%, 105%, 110%).
Setting can be stroed to the Personal Disc
Memory.
• This function can be operated on the
remote control only.
1 Press DISPLAY for 2 seconds or more
during playback.
2 Turn the control repeatedly until
"SPEED" flashes in the display, and then
press x to enter.
The recorder changes to speed-setting
mode.
3 Turn the control repeatedly to select the
playback speed.
"+" shows the normal speed and the
cursor shows the playback speed you
are selecting.