Adjusting Treble Or Bass (Digital Sound Preset); Selecting The Sound Quality; Adjusting The Sound Quality - Sony Walkman MZ-N420D Operating Instructions Manual

Adjusting treble or bass
(Digital Sound Preset)
You can adjust the treble and bass to suit
your taste. The player can store two sets
of treble-bass adjustments, which can
then be selected later during playback.
ENT/NX, .,
>, x/CANCEL

Selecting the sound quality

Factory settings
Factory settings of the digital sound preset
are as follows:
• "SOUND1": bass +1, treble ±0
• "SOUND2": bass +3, treble ±0
1
While playing, press MENU.
2
Press . or > repeatedly until
"SOUND" appears in the display, and
press ENT/NX.
3
Press . or > repeatedly to
select "SOUND1", "SOUND2", or
"OFF" in the display, and then press
ENT/NX to enter the selection.
Selecting "OFF" turns off the digital
sound preset function.
MENU

Adjusting the sound quality

You can change the preset sound quality.
To change the preset sound quality, select
"SOUND1" or "SOUND2", the one you
want to change, in advance.
1
While playing, press MENU.
2
Press . or > repeatedly until
"SOUND" appears in the display, and
then press ENT/NX.
3
Press . or > repeatedly until
"SET" appears in the display, and
then press ENT/NX.
4
Press . or > repeatedly until
"SOUND1" or "SOUND2" appears
in the display, and then press ENT/
NX.
The display shows the current
"BASS" sound setting.
5
Press . or > repeatedly to
adjust the sound level.
Shows "SOUND1" or
"SOUND2" is selected
The sound can be adjusted in 8 steps.
(–4, –3, ...±0, ...+2, +3)
6
Press ENT/NX.
"BASS" is set and the display
changes to "TRE" (treble) setting
mode.
7
Press . or > repeatedly to
adjust the sound level, and then press
ENT/NX to enter the selection.
"TRE" (treble) is set.
The sound settings are saved and the
playback display appears again.
19