Engine - Connect - New Holland T6.140 Service Manual

Engine - Connect

T6.155
T6.165
T6.175
WARNING
Heavy objects!
Lift and handle all heavy components using lift-
ing equipment with adequate capacity. Always
support units or parts with suitable slings or
hooks. Make sure the work area is clear of all
bystanders.
Failure to comply could result in death or seri-
ous injury.
WARNING
Avoid injury!
Handle all parts carefully. Do not place your
hands or fingers between parts. Use Personal
Protective Equipment (PPE) as indicated in this
manual, including protective goggles, gloves,
and safety footwear.
Failure to comply could result in death or seri-
ous injury.
All vehicles
1. Thoroughly clean the engine to transmission mating
surfaces and apply a bead of sealant.
2. Align the front support and engine assembly to the
transmission and relocate.
Tighten to 285-315 Nm ( 210-232 lb ft).
3. Install the centre engine to transmission securing bolt
(2). Install the top left hand engine to transmission se-
curing bolt (1). Tighten to 285-315 Nm ( 210-232 lb ft).
NOTE: Repeat this step for the right-hand side.
Engine - Engine and crankcase
NA
NA
NA
W0398A
W0208A
47665870 27/03/2014
10.1 [10.001] / 25
1
BAIL12APH161AVA
2
BAIL07APH147AVA