Remove - New Holland T6.140 Service Manual

Vehicles with SuperSteer™ front axle
Remove the four-wheel drive shaft guard retaining bolts.
Remove the four-wheel drive shaft guard.
NOTE: Repeat the operation on both sides of the vehicle.
Remove the four-wheel drive shaft front retaining bolts.
NOTE: Support the four-wheel drive shaft.
30. Remove the four-wheel drive shaft.
Vehicles with standard front axle
31. Remove the front wheel drive shaft guard and drive
shaft.
NOTE: The type of drive shaft fitted is dependant on type
of front axle installed.
Engine - Engine and crankcase
47665870 27/03/2014
10.1 [10.001] / 21
30
BAIS06CCM033AVA
31
BAIS06CCM034AVA
32
BAIS06CCM035AVB
33
BSD1959A